Power System Studies & Simulation.
Load flow, short circuit, relay coordination, arc flash, harmonics, transients, insulation coordination, grid code compliance, battery sizing and microgrid simulation. Each study answers a question before equipment is bought.
Is This Where You Are?
Choose your role to see what we do, what changes for you, and what to read next.
Compliance study, built to the utility's format — carried straight into your design.
A grid code and compliance study built in the format the connecting utility expects — so the approval that was blocking your Project moves, instead of coming back with another round of questions.
Coordination study of the real network, with settings your team can load.
A coordination study of your real network, with a setting schedule your team can load directly — the nuisance trip stops, and the fault it should catch, it now catches.
Incident energy per bus, to IEEE 1584 — mitigation ranked by risk.
Incident energy and PPE category calculated per bus, to IEEE 1584, with mitigation ranked by risk — so the next inspection or incident review has evidence, not an estimate.
Engineering Scope.
Twelve studies. Each one answers a single question, before equipment is bought.
Load Flow
Can the network carry the load in every operating case?
Short Circuit
Is every piece of equipment rated for the worst fault?
Relay Coordination
Will protection isolate a fault fast, and only where it should?
Arc Flash
What is the hazard at each switchboard, and the PPE it needs?
Earthing
Is the site safe for people during an earth fault?
Harmonics & Power Quality
Will distortion overheat equipment or breach utility limits?
Transient Studies
What happens in the milliseconds after a switch, fault or strike?
Insulation Coordination
Are insulation levels and arresters right for the overvoltages?
Motor Starting
Will large motors start without pulling the voltage down?
Grid Code Compliance
Will the utility approve the connection first time?
Battery Sizing
How much storage, at what power and for how long?
Microgrid Simulation
Does the system stay stable once it separates from the grid?
Also available: contingency and reliability, dynamic RMS simulation, stray current, traction harmonics, EV charging load impact, and N+1 / 2N redundancy for critical facilities.
At Each Project Stage.
Where you are in the Project decides what you need from us.
Feasibility & Concept
Validate viability and size the system before capital is committed.
- Load flow and network performance
- Renewable and BESS grid integration feasibility
- Techno-economic sizing basis
Detailed Design
Set the ratings and settings the whole design depends on.
- Short circuit and protection coordination
- Arc flash hazard analysis
- Insulation coordination and transients
- Harmonic and grid code compliance
Tender & Procurement
Confirm equipment ratings match the studies before you order.
- Equipment rating verification against study results
- Technical bid review
Construction
Studies are frozen; site queries reference them, not repeat them.
- Design-basis clarifications
- Settings confirmed for panel and relay ordering
Pre-Commissioning & Commissioning
Prove the settings on the real network before energisation.
- Relay setting verification support
- As-built model reconciliation
Operation & Maintenance
Re-study as the network, load or standard changes.
- Arc flash re-study, typically every 5 years
- Studies for retrofits, expansions or new loads
- Harmonics and power quality troubleshooting
Proof in Practice · Pharma · Power Quality
Resolving Power Quality Challenges in a Dual-Source 33 kV API Facility
Diagnosing and fixing power quality problems in an API plant supplied from two 33 kV sources.
- Sector
- Industrial & Process Plants
- Year
- 2025
How We Work on It.
The method behind every engagement. The detail is set out in the proposal and the design basis.
Inputs and Deliverables.
A practical starting point and the Engineering outputs to agree for your Project.
What We Need from You
- Single-line diagram
- Equipment data: transformers, cables, generators, motors, protection
- Utility fault levels and connection requirements
- Load, generation and operating scenarios
- The standard or grid code the study must meet
Send what is available. We will identify missing information before confirming the scope and programme.
What You Receive.
- Study report with assumptions, cases, results and recommendations
- Protection setting schedules
- Arc flash results and mitigation plan
- Harmonic filter design, where needed
- Grid code compliance results
- Study models, on request
The exact deliverables are fixed in the agreed scope for each Project.
Standards and Compliance.
We engineer to the standards and regulations that govern your Project, fixed in the design basis.
Typical references for this Service: IEC 60909, IEEE 1584, IEEE 80, IEEE 519, IEC 60071.
Applicable standards and editions are agreed and fixed in each Project's design basis.
How We Assure the Work
Appointed the Way You Need.
Owner's Engineer
Feasibility and grid studies, and review of others' studies.
Detailed Engineer
Studies that set ratings and settings for the design.
Design Partner
Specialist studies, white-labelled where required.
Questions Clients Ask.
Which studies do you carry out?
Load flow including time-series load flow, short circuit, relay coordination, arc flash, harmonics, transient stability and electromagnetic transients, insulation coordination, grid code compliance, battery sizing, microgrid simulation, earthing and motor starting.
Can you prepare grid connection studies?
Yes, renewable and BESS integration and grid code compliance studies for the connecting utility.
Can you study an existing plant?
Yes. Arc flash, protection and harmonic studies are often the first step to a safer plant.
Read more: Power Quality Audits: Reading Harmonics, Sags and Flicker →Can you review another consultant's study?
Yes, as Owner's or Independent Engineer, but not where we are also the Detailed Engineer.
Read more: Owner's Engineer or Detailed Engineer: Which Appointment Do You Need? →Where This Service Applies.
This Service appears in the scope of 6 Sectors. Select a Stage to see the full scope for that Sector.
This Service in Practice.
Selected engagements, described without confidential details.
From Our Engineers.
Practical engineering notes related to this page.
