Technical Audits & Assessments.
Energy, electrical safety, arc flash, thermography, partial discharge, power quality and compliance audits, measured on site and reported against the limit.
Project location, local requirements and any site support are confirmed for the agreed scope.
Explore Global DeliveryEngineering Scope.
The support is selected around your Asset, the decision ahead and the agreed Project Stage.
Energy
- Detailed energy audit using ASHRAE Level 2 methodology where applicable
- Load, motor and power quality assessment
- Lighting audits to IS / NBC illuminance
- HVAC air and water balance
Electrical Safety
- Safety audit and gap assessment
- Arc flash hazard analysis
- Hazardous area electrical assessment
- Earthing audits
Condition
- Thermography
- Partial discharge
- Power quality
- EMF measurement
Compliance
- Regulatory and statutory compliance
- Data centre redundancy review against Client-specified Tier criteria
- Factory and plant electrical audit
- Due diligence
Proof in Practice · Pharma · Power Quality
Resolving Power Quality Challenges in a Dual-Source 33 kV API Facility
Diagnosing and fixing power quality problems in an API plant supplied from two 33 kV sources.
- Sector
- Industrial & Process Plants
- Year
- 2025
How We Work on It.
The method behind every engagement. The detail is set out in the proposal and the design basis.
Inputs and Deliverables.
A practical starting point and the Engineering outputs to agree for your Project.
What We Need from You
- Site address, access rules and a contact for safe inspection
- Available single-line diagrams, asset register and equipment ratings
- Energy bills and interval-meter data for an energy audit
- Earlier audit, study, maintenance and test records
- Audit objective, reporting period and governing requirements
Send what is available. We will identify missing information before confirming the scope and programme.
What You Receive.
- Engineer-signed findings and scope-specific audit report
- Measured results against the agreed criteria or acceptance limits
- Relevant thermograms, waveforms, photographs and test records
- Evidence-based causes or likely causes where the data permits
- Prioritised corrective actions and further-investigation items
- Instrument identification and applicable calibration certificates
The exact deliverables are fixed in the agreed scope for each Project.
Standards and Compliance.
We engineer to the standards and regulations that govern your Project, fixed in the design basis.
Typical references for this Service: ISO 50002, ASHRAE Standard 211, IEEE 1584, EN 50160.
Applicable standards and editions are agreed and fixed in each Project's design basis.
How We Assure the Work
Questions Clients Ask.
What is an ASHRAE Level 2 audit?
A detailed survey and analysis of energy use, with measured data and savings recommendations.
Are results independent?
Every report is signed by a qualified engineer, and readings sit beside the limit so findings can be checked.
Read more: Owner's Engineer or Detailed Engineer: Which Appointment Do You Need? →Where This Service Applies.
This Service appears in the scope of 6 Sectors. Select a Stage to see the full scope for that Sector.
This Service in Practice.
Selected engagements, described without confidential details.
From Our Engineers.
Practical engineering notes related to this page.
