Elegrow TechnologyEngineered to Evolve Discuss Your Project
Home/Sectors/Solar, BESS & Power Generation/On-Site Power & Cogeneration

On-Site Power & Cogeneration.

Captive generation, CHP and standby power inside an industrial site. It must run in parallel with the grid, and carry the plant when the grid fails.

Types We Engineer.

No two On-Site Power & Cogeneration Projects are the same. Here is what changes from one type to the next.

Captive Generation

On-site generators supplying the plant, often in parallel with the grid.

What We Focus On
  • Grid-parallel protection
  • Load shedding and islanding

Combined Heat & Power

Generation with heat recovered for the process.

What We Focus On
  • Heat exchangers and boilers
  • Energy balance and audits

Standby Power

DG sets that carry critical loads when the grid fails.

What We Focus On
  • Transfer schemes and testing
  • Load bank and DG testing

Where This Asset Sits.

The Solar, BESS & Power Generation power chain, and this asset's place in it.

Available for Projects In
Australia RemoteOn Site Enquire

Is This Where You Are?

Choose your role to see what we do and what to read next.

Across the Project Stages.

Where each part of the work sits in the life of a On-Site Power & Cogeneration.

Stage 03Tender & ProcurementAvailable on request
Stage 04ConstructionAvailable on request
Stage 05Pre-Commissioning & CommissioningTesting & Commissioning
Stage 06Operation & MaintenanceTechnical Audits & Assessments

Standards and Compliance.

We engineer to the standards and regulations that govern the Project, fixed in the design basis.

International StandardsIEC, IEEE, ISO, ASME and API standards, as the Project requires.
National CodesThe codes of the country where the asset is built: BIS and CEA in India, NEC in the USA, BS in the UK, EN in Europe, AS/NZS in Australia, GSO and SASO in the Gulf.
Utility & Authority RequirementsGrid codes, utility specifications and the approvals of the connecting authority.
Client & Lender SpecificationsOwner, licensor and lender requirements, fixed in the design basis.

Typical references for this asset: IEC 60909, IEEE 1584, IEEE 80, IEEE 519, IEC 60071, IEC 60364.

Proof in Practice · Solar · Yield

Shadow Analysis and Yield Estimation of a 0.98 MWp Solar Plant

Near-shading analysis and yield estimation to set realistic generation expectations before the plant was built.

Sector
Solar, BESS & Power Generation
Year
2023
Read the Case Study

Planning a on-Site Power & Cogeneration?

Share the asset, the location and the stage. An engineer will come back with a proposed scope.

Enquire Now



This will close in 0 seconds

Enquire Now


    This will close in 0 seconds

    Submit


      This will close in 0 seconds

      Enquire Now


      This will close in 0 seconds

      Enquire Now last



      This will close in 0 seconds

        This will close in 20 seconds

        New contact us form
        Subscribe For

        This will close in 0 seconds

        This will close in 0 seconds

          This will close in 0 seconds

          Cookie Consent Banner by Real Cookie Banner