Mechanical Equipment & Systems Design.
Process skids, pressure vessels, storage tanks, heat exchangers, boilers, thermic fluid heaters and chimneys, designed to code with calculations a fabricator and an inspector can follow.
Is This Where You Are?
Choose your role to see what we do and what to read next.
Code calculations, datasheets and fabrication-ready drawings as your Design Partner, delivered under your name where you need it.
Independent review of vendor calculations and drawings against the code and your specification, before fabrication starts.
Equipment design done alongside piping, pipe stress and foundations in one team, so nozzle loads and support loads agree.
Engineering Scope.
The support is selected around your Asset, the decision ahead and the agreed Project Stage.
Pressure Equipment
- Pressure vessels
- Heat exchanger thermal and mechanical design
- Nozzle, support and local load checks
- Finite element analysis where code rules are not enough
Storage and Static Equipment
- Storage tanks to API 650
- Silos and hoppers
- Chimneys and stacks
Thermal Equipment
- Boilers and thermic fluid heaters to Indian and international codes
- Cooling and ventilation systems
Skids and Plant Systems
- Process skids with static and rotating equipment
- Skid and plant 3D modelling
- Piping layout, supports and pipe stress analysis
- Skid base frames with our structural team
At Each Project Stage.
Where you are in the Project decides what you need from us.
Feasibility & Concept
Size the equipment before the numbers are fixed.
- Equipment sizing and concept layout
- Heat exchanger thermal sizing
- Skid concept and space planning
Detailed Design
Code calculations and drawings to build from.
- Vessel and heat exchanger design
- Tank, silo and chimney design
- Skid design and 3D model
- Pipe stress analysis
- Fabrication and GA drawings
Tender & Procurement
Datasheets that make bids comparable.
- Equipment datasheets and specifications
- Vendor drawing and calculation review
- Technical bid evaluation
Construction
Check what is fabricated and erected.
- Factory Acceptance Testing witness
- Inspection of major equipment
- Site query resolution
Pre-Commissioning & Commissioning
Support through start-up.
- Commissioning support
- Punch-list review against design
Operation & Maintenance
Modify with the design basis in hand.
- Modification and upgrade design
- Pipe stress checks for plant changes
- Energy audits of thermal systems
Proof in Practice · Chemical · Detailed Engineering
Detailed Engineering of a Multi-Specialty Chemical Plant
Mechanical, electrical, instrumentation and thermal design delivered together for a multi-product chemical plant.
- Sector
- Industrial & Process Plants
- Year
- 2023
How We Work on It.
The method behind every engagement. The detail is set out in the proposal and the design basis.
Inputs and Deliverables.
A practical starting point and the Engineering outputs to agree for your Project.
What We Need from You
- Process datasheet: fluid, flow, design pressure and temperature
- Governing code and Client specification
- Wind, seismic and ambient site data
- Material preferences and corrosion allowance
- Layout constraints and nozzle orientation
Send what is available. We will identify missing information before confirming the scope and programme.
What You Receive.
- Design basis
- Mechanical design calculations
- Heat exchanger thermal design reports
- Datasheets and nozzle schedules
- GA and fabrication drawings
- 3D skid and plant models
- Pipe stress and FEA reports
- Foundation load data
- Vendor document review comments
The exact deliverables are fixed in the agreed scope for each Project.
Standards and Compliance.
We engineer to the standards and regulations that govern your Project, fixed in the design basis.
Typical references for this Service: ASME Section VIII, ASME Section I, API 650, TEMA, ASME B31.3.
Applicable standards and editions are agreed and fixed in each Project's design basis.
How We Assure the Work
Appointed the Way You Need.
Design Partner
Calculations, models and drawings under your name.
Detailed Engineer
Equipment and skid design within the plant package.
Owner's Engineer
Independent review before you accept the equipment.
Questions Clients Ask.
Which codes do you design to?
Indian and international codes, as the Project requires: for example ASME Section VIII, EN 13445, PD 5500, AS 1210 or IS 2825 for pressure vessels; the Boilers Act, 2025 and IBR, ASME Section I or EN 12952 / 12953 for boilers; and API 650, API 620, IS 803 or EN 14015 for storage tanks.
Do you issue fabrication drawings?
Yes. We issue GA and fabrication drawings with 3D models, ready for the fabricator and the inspecting authority.
Do you do heat exchanger thermal design?
Yes, thermal design and rating, followed by the mechanical design.
Can you act as our design office?
Yes, including work delivered under your name.
Where This Service Applies.
This Service appears in the scope of 6 Sectors. Select a Stage to see the full scope for that Sector.
This Service in Practice.
Selected engagements, described without confidential details.
From Our Engineers.
Practical engineering notes related to this page.
