Envox EMS, BMS & SCADA.
Turn disconnected Asset data into clear operating decisions. Envox brings status, alarms, energy trends and reports into views built for the people using them.
Envox is an Elegrow Technology initiative for EMS, BMS and SCADA integration. We define the points, interfaces and operating views around your Asset and team.
Is This Where You Are?
Choose your role to see what we do, what changes for you, and what to read next.
A coordinated operating view with agreed alarm priorities and event history.
Status, alarms and event history are brought into a view designed around the response process.
Tell us about the asset and the stage; an engineer replies with a proposed scope.
Discuss Your ProjectConsistent trends and reports around the decisions the team needs to make.
Comparable trends and reports support operating and investment decisions.
Tell us about the asset and the stage; an engineer replies with a proposed scope.
Discuss Your ProjectA defined points register and interface architecture that can be checked before handover.
The points register, interfaces and permissions are verified before acceptance.
Tell us about the asset and the stage; an engineer replies with a proposed scope.
Discuss Your ProjectWhat the System Helps You Do.
The agreed points, permissions and interfaces determine what can be monitored, reported or controlled.
Connect Existing Systems
Map available points and connect compatible meters, controllers and equipment through agreed interfaces.
Understand Energy Use
Compare consumption and operating trends by the areas, feeders or loads defined in the brief.
See Status and Alarms
Bring live values, equipment status, alarm priorities and event history into an operator view.
Report and Follow Up
Create role-specific dashboards, trends and reports with clear responsibility for action.
Coordinate SCADA
Integrate the agreed electrical system signals and automation interfaces.
Manage Building Systems
Bring the agreed HVAC, air quality, ventilation and water points into the operating view.
Control boundary: Monitoring and control permissions are agreed per system. Process control remains with the appointed DCS or PLC.
Connected Data.
Clear Operating Decisions.
We begin with the questions your team must answer, then define the signals, interfaces, views and responsibilities required to answer them.
The supervisory framework, hosting, protocols and any control functions are selected for the Asset and confirmed in the Engineering brief.
How We Work on It.
The method behind every engagement. The detail is set out in the proposal and the design basis.
Inputs and Deliverables.
A practical starting point and the Engineering outputs to agree for your Project.
What We Need from You
- The operating questions your team needs answered
- Available system drawings, points lists and protocol details
- Network, cybersecurity and access requirements
- Alarm and reporting priorities
- Hosting and data-retention requirements
Send what is available. We will identify missing information before confirming the scope and programme.
What You Receive.
- Agreed points register and system architecture
- Interface and configuration documentation
- Configured dashboards, alarms, trends and reports
- Point-to-point checks and commissioning record
- Operator handover and training where included
The exact deliverables are fixed in the agreed scope for each Project.
Standards and Compliance.
We engineer to the standards and regulations that govern your Project, fixed in the design basis.
Typical references for this Service: IEC 61850, Tridium Niagara N4.
Applicable standards and editions are agreed and fixed in each Project's design basis.
How We Assure the Work
Appointed the Way You Need.
Operate
See reliable status, act on alarms and review performance.
Decide
Understand energy and Asset behaviour from agreed reports.
Deliver
Define points and interfaces early, then hand over a checked system.
Questions Clients Ask.
What is Envox?
Envox is Elegrow Technology's EMS, BMS and SCADA initiative. The architecture can use Tridium Niagara N4 where specified.
Can it connect to existing systems?
Compatible systems can connect through agreed gateways and controllers after protocol and point availability are checked.
Can it control equipment?
Control functions and user permissions are defined in the Engineering brief and tested during commissioning.
What do you need for a proposal?
Share the systems to connect, available points lists and the operating decisions your team needs to make.
